Qaabka Mashiinka: Tartame-5000 Khadka Isku Xidhka Wanaagsan (Qadka Buuxa)
| Qaabka Mashiinka: Loolanka-5000Khadka Isku Xidhka Wanaagsan (khadka buuxa)
| |||
| Walxaha | Habaynta caadiga ah | Q'ty | |
| a. | G460P/12Stations Gatherer | Oo ay ku jiraan 12 xarumood oo la isugu yimaado, goob quudinta gacanta, geyn iskutallaab ah iyo albaab diidmo oo saxeex khaldan. | 1 dejiso |
| b. | Tartame-5000 Binder | Oo ay ku jiraan guddiga xakamaynta shaashadda taabashada, 15 buug oo xidhmo ah, 2 xarumood oo wax lagu shiidayo, xarun la dhaqaajin karo oo lafta dhabarka lagu dhejiyo iyo goob la dhaqaajin karo, saldhigga quudinta daboolka qulqulka, saldhigga nuujinta iyo nidaamka sifaynta tooska ah. | 1 dejiso |
| c. | Supertrimmer-100Saddex-Midi gooye | Oo ay ku jiraan guddiga xakamaynta shaashadda taabashada, suunka qaadista jiifka ee toosan ee midigta, cutubka quudinta tooska ah, unugga trimmer trimmer, gaarsiinta xajinta, iyo qaadiyaha siidaaya. | 1 dejiso |
| d. | SE-4 Buugaag isbaara | Oo ay ku jiraan cutubka is dulsaarka, unugga riixitaanka buugta iyo bixidda degdegga ah. | 1 dejiso |
| e. | Gaadhida | Oo ay ku jirto 20-mitir qaadaha isku xirka. | 1 dejiso |
Nidaamka isku xidhka ee loo yaqaan 'Challenger-5000' waa xalka ku habboon ee wax-soo-saarka yar iyo midka dhexe ee ku socda ugu badnaan.xawaaraha ilaa 5,000 wareeg saacaddii.Waxay ka kooban tahay ku habboonaanta hawlgalka, wax soo saarka sare, beddelka dabacsan ee habab badan oo xidhidh, iyo saamiga waxqabadka aad u fiican.
Astaamaha Wacan:
♦ Wax soo saar sare oo saafi ah oo ah 5000 buug/saacadood oo dhumucdiisu tahay ilaa 50mm.
♦ Tilmaamayaasha boosku waxay bixiyaan hawlgal saaxiibtinimo ku habboon iyo hagaajinta saxda ah.
♦ Diyaarinta laf dhabarta oo leh mishiin wax lagu shiido oo awood leh si loo sameeyo laf dhabarta tayada sare leh.
♦Nin adag oo dabool saldhigyada dhibcaha si adag oo sax ah loogu xidho.
♦European ka soo waarida alaabada agabka ayaa dammaanad qaadaya waxqabad xoogan oo joogto ah.
♦Isbeddel dabacsan oo u dhexeeya hotmelt EVA iyo habka xidhitaanka PUR.
Habaynta 1:G460P/12 Rugaha Saldhigyada
Nidaamka ururinta G460P waa mid degdeg ah, deggan, habboon, hufan, oo dabacsan.Waxaa loo isticmaali karaa sidii mashiin kali ah ama ku xiran khadka-Superbinder-7000M/Challenger-5000 Perfect Binder.
●Lagu kalsoonaan karo oo aan calaamadayn kala soocida saxeexa iyada oo ay ugu wacan tahay naqshadda kulanka tooska ah.
● Shaashadda taabashada waxay ogolaataa hawlgal sahlan iyo falanqaynta khaladka habboon.
●Kontoroolka tayada dhamaystiran ee seef-quudinta, laba-quudinta iyo saxmada waraaqaha.
●Isbeddel fudud oo u dhexeeya 1:1 iyo 1:2 hababka wax soo saarka waxay keenaysaa dabacsanaan sare.
●Qeybta gaarsiinta iskutallaabta iyo xarunta quudinta gacanta ayaa loo bixiyaa sifooyin caadi ah.
●Diidii albaabka saxeexyada khaldan waxay hubisaa wax soo saarka aan joogsiga lahayn.
●Kontoroolka tayada aadka u wanaagsan waxa awood u leh nidaamka aqoonsiga saxeexa ikhtiyaariga ah.
 | TaaboShaashada Nidaamka Xakamaynta Nidaamka xakamaynta shaashadda taabashada ayaa u oggolaanaya hawlgal sahlan iyo falanqaynta khaladka habboon.
|
 | 12 Goobaha la isugu yimaado 4 saldhig oo ah 1 unug, guud ahaan 3 unug.
Nidaamka hubinta saxeexa tooska ah ee xarun kasta oo la isugu yimaado si loo ogaado quudinta seeska ah, quudinta badan, iyo saxmada waraaqaha (waxa jira dareemayaal xarun kasta oo la isugu yimaado si loo ogaado quudinta maqan, waxaana jira daaran u dhow goob kasta oo la isugu yimaado si loo ogaado dhawr- quudin, si loo dammaanad qaado dhumucdu inay sax tahay).
Naqshadeynta toosan ee isu imaatinka waxay yarayn kartaa is jiid jiidka saxeexyada si looga fogaado calaamad kasta oo warqadda ku taal inta lagu jiro habka ururinta.
|
 | 1:2 Habka Xawaaraha Beddelka Farsamaynta Xawaaraha sare ee ururinta oo leh 1:2 habka beddelka xawaaraha.
|
 | Reject AlbaabkaIridda diidmada ee saxiixa khaldan waxay xaqiijisaa wax soo saarka aan joogsiga lahayn. |
 | Saldhigga Quudinta GacantaGoobta quudinta gacanta ayaa la siiyay quudinta habboon ee saxeexyo dheeraad ah. |
 | Unugga gaarsiinta-Cross-CrossQaybta gudbinta qalafsanaantu waxa ay si hufan u ururinaysaa baloogyada buugaagta ee si wanaagsan loo ururiyay. |
 | OrionBambooyinka Vacuum1 bambo faaruq ah unug kasta, gebi ahaanba 3 bambooyin faaruq ah oo loogu talagalay saldhigyada G460P/12 |
Habaynta2: Tartame-5000 Binder
15-clamp kaamil ah tartame-5000 waa doorasho ku habboon socodsiinta wax soo saarka yaryar iyo kuwa dhexe oo leh xawaare ilaa 5000 wareeg ah/saacaddii.Waxay ka kooban tahay hawlgal sahlan iyo isbeddel sax ah oo ku saabsan tilmaamayaasha booska.
 | Axarunta kantaroolka oo leh shaashad taabasho ahMenu-hawleed is-dhexgal ah wuxuu bixiyaa kontorool fudud oo degdeg ah mashiinka.Xogta wax-soo-saarka, xawaaraha mishiinka iyo fariinta digniinta ayaa la soo bandhigay. |
 | An isaldhiga infeed ee nclinedRugta quudinta ee la xoojiyey waxaa ka mid ah isku xidhka G460B gatherer (loo heli karo gacan-quudinta).Miiska siman ee leh gariir isku dhafan ayaa dammaanad qaadaya in dhammaan saxiixyada ay si fiican u siman yihiin kahor diyaarinta lafdhabarta. |
 | 15 qaybood oo buug-xajin ahBallaca furitaanka ee dhammaan xirmooyinka la isku hagaajiyay oo lagu muujiyay tilmaame booska.
|
 | Laba saldhig oo wax lagu shubo lafdhabartaLabo xarun diyaarinta laf dhabarta ayaa bixisa wax-shiidid iyo xoqid, taas oo hubinaysa in laf dhabarta si wanaagsan loogu diyaariyey codsiga xabagta.
|
 | A dhaqaaqi karo saldhiga xabagta laf dhabartaSaldhigga xabagta dhabarka ee EVA ee la dhaqaajin karo oo leh dhalaalid ka hor waxay u shaqeysaa sidii nidaam la beddeli karo ee codsiga PUR. A dhaqaaqi karo sfikradsaldhiga xabagta Saldhigga xabagta dhinaca EVA ee la dhaqaajin karo oo leh dhalaalid ka hor waxay u shaqeysaa sidii nidaam la beddeli karo ee codsiga PUR. |
| A quudinta daboolka durdurradasaldhigNaqshadeynta infeed-ka fidsan waxay u oggolaaneysaa culeyska wax soo saarka ballaaran in loo soo saaro si deggan oo raaxo leh. Taayirada dhibcaha daboolka ah ayaa loo hagaajin karaa si ku habboon iyadoo loo eegayo dhumucda buugga iyo qaabka daboolka.
|
 | A saldhiga nuujintaNidaamka naasnuujinta ka sarreeya wuxuu keenaa cadaadis xoog leh si uu u abuuro xidhmo adag oo waara oo leh geeso fiiqan. |
 | Unug gaarsiinta oo diidayQalab si fiican loo dhigo ayaa ka hortagaya laf-dhabarta in ay qalloocaan oo u dhaqmaan sidii isku xirka isku xirka khadka. |
 | Asoo saarida boodhka waraaqahaQashinka warqadda waxaa ka saari kara boodhka warqadaha ee xoogga badan si ay u nadiifiso nidaamka. |
 | Anhabka saliidaynta tooska ah |
Habaynta3: Supertrimmer-100 Trimmer Saddex-Midi
Supertrimmer-100 waxa uu leeyahay qaabayn adag iyo goyn sax ah oo sax ah oo leh guddi kontorool shaashad taabasho-saaxiibtinimo leh.Mashiinkan waxa loo istcimaali karaa in kaligeed istaagto, ama lagu xidho khadka si loo helo xal dhamaystiran
♦ Habka la hagaajiyay: quudinta, meelaynta, riixida, riixida, jarista, wax soo saarka.
♦ Ma jiro buug aan la gooyn xakamaynta si looga fogaado dhaqdhaqaaqyada aan loo baahnayn
♦Feemka mashiinka wax lagu shubo ee gariir yaraanta iyo saxnaanta gooynta sare.
 | Hal qayb oo ah Supertrimmer-100Taabo kontoroolka shaashaddasuunka qaad-qaadista jiifka ee toosan dhanka midig Cutubka quudinta tooska ah Unug saddex-middi gooya geynta gripper Gaadhida wax soo saarka
|
Habaynta4:SE-4 Buugaag isbaara
 | Hal set oo ah SE-4 Book Stacker Cutubka is dulsaarkaBuug ka bax degdeg ah. |
Habaynta5:Gaadhida
 | 2Gaadhida isku xirka 0-mitirDhererka guud: 20 mitir.1 buug bixitaan degdeg ah. Kontoroolka muhiimka ah ee LCD. Qayb kasta oo ka mid ah xawliga qaadaha waxaa lagu hagaajiyay saami ama si gooni ah.
|
| Liiska Qaybaha Muhiimka ah eeLoolanka-5000Nidaamka Isku-xidhka | |||
| Shayga Lr. | Magaca Qaybaha | Summada | Odhaah |
| 1 | PLC | Schneider (Faransiis) | Soo ururiye, Binder, Trimmer |
| 2 | rogroge | Schneider (Faransiis) | Soo ururiye, Binder, Trimmer |
| 3 | Shaashada taabashada | Schneider (Faransiis) | Soo ururiye, Binder, Trimmer |
| 4 | Shidaalka korontada | Schneider (Faransiis) | Binder, Trimmer |
| 5 | Shidaalka korontada | MOELLER (Jarmalka) | Ururiye |
| 6 | Matoorka ugu weyn ee binder, mashiinka Milling station | SIEMENS (Shirkadda Shiinaha-Jarmalka) | Binder |
| 7 | Korontada beddeleysa | Schneider (Faransiis) | Ururiye |
| 8 | Korontada beddeleysa
| Bari (Shirkadda wadajirka ah ee Shiinaha iyo Japan) | Trimmer |
| 9 | Dareemaha korantada
| LEUZE (Jarmalka), P+F(Jarmalka), OPTEX (Japan) | Soo ururiye, Binder |
| 10 | Bedelka u dhowaanshaha | P+F(Jarmalka) | Soo ururiye, Binder, Trimmer |
| 11 | Badbaadada beddelka | Schneider (Faransiis), Bornstein(Jarmalka) | Soo ururiye, Binder, Trimmer |
| 12 | Badhamada
| Schneider (Faransiis), MOELLER (Jarmalka) | Soo ururiye, Binder, Trimmer |
| 13 | Xiriiriyaha | Schneider (Faransiis) | Soo ururiye, Binder, Trimmer |
| 14 | Shidaalka ilaalinta baabuurta, wareegga wareegga | Schneider (Faransiis) | Soo ururiye, Binder, Trimmer |
| 15 | Bamka hawada
| ORION (Shirkadda wadajirka ah ee Shiinaha iyo Japan) | Soo ururiye, Binder |
| 16 | Compressor hawada
| HATACHI (Shirkadda wadajirka ah ee Shiinaha iyo Japan) | Khadka Buuxa |
| 17 | Qaadashada
| NSK/NTN (Japan), FAG (Jarmalka), INA (Jarmalka) | Binder, Trimmer |
| 18 | Silsilad
| TSUBAKI(Japan), TYC (Taiwan) | Binder, Trimmer |
| 19 | Waalka Electromagnetic
| ASCA (USA), MAC (Japan), CKD (Japan) | Soo ururiye, Binder |
| 20 | Dhululubada hawada | CKD (Japan) | Soo ururiye, Trimmer |
Fiiro gaar ah: Nakhshadeynta mashiinka iyo qeexitaannada waa la bedeli karaa ogeysiis la'aan.
| Xogta Farsamada | |||||||||
| Qaabka Mashiinka | G460P/8 | G460P/12 | G460P/16 | G460P/20 | G460P/24 |
| |||
| Tirada Saldhigyada | 8 | 12 | 16 | 20 | 24 | ||||
| Min.Cabbirka xaashida (a) | 196-460mm | ||||||||
| Min.Cabbirka xaashida (b) | 135-280mm | ||||||||
| In-line Max.Xawaaraha | 8000 wareeg/saacaddii | ||||||||
| Khadka ka baxsan Max.Xawaaraha | 4800 wareeg/saacaddii | ||||||||
| Awood Loo Baahan Yahay | 7.5kw | 9.7kw | 11.9kw | 14.1kw | 16.3kw | ||||
| Miisaanka mashiinka | 3000kg | 3500kg | 4000kg | 4500kg | 5000kg | ||||
| Dhererka Mashiinka | 1073mm | 13022mm | 15308mm | 17594mm | 19886 mm | ||||
| Qaabka Mashiinka | Loolanka-5000 |
| |||||||
| No. of Clamps | 15 | ||||||||
| Max.Xawaaraha Makaanikada | 5000 wareeg/saacaddii | ||||||||
| Dhererka xannibaadda buugga (a) | 140-460mm | ||||||||
| Ballaca Buugga (b) | 120-270mm | ||||||||
| Dhumucda Buugga Buugga (c) | 3-50mm | ||||||||
| Dhererka Daboolka (d) | 140-470mm | ||||||||
| Ballaca Daboolka (e) | 250-640mm | ||||||||
| Awood Loo Baahan Yahay | 55kw | ||||||||
| Qaabka Mashiinka | Supertrimmer-100 |
| |||||||
| Cabbirka Buugga Aan La Goyn (a*b) | Max.445*310mm (khadka ka maqan) | ||||||||
| Min.85*100mm (khadka ka maqan) | |||||||||
| Max.420*285mm (khadka dhexdiisa) | |||||||||
| Min.150*100mm (khadka dhexdiisa) | |||||||||
| Cabbirka Buugga La Jaray (a*b) | Max.440*300mm (khadka ka maqan) | ||||||||
| Min.85*95 mm (khadka ka maqan) | |||||||||
| Max.415*280mm (khadka dhexdiisa) | |||||||||
| Min.145*95mm (khadka dhexdiisa) | |||||||||
| Iska jar Dhumucda | Max.100 mm | ||||||||
| Min.10 mm | |||||||||
| Xawaaraha Makaanikada | 15-45 wareeg/saacaddii | ||||||||
| Awood Loo Baahan Yahay | 6.45 kw | ||||||||
| Miisaanka mashiinka | 4,100kg | ||||||||
