FD-AFM450A Kiis Sameeyaha
❖ Nidaamka PLC: Japanese OMRON PLC, shaashadda taabashada 10.4 inch
❖ Nidaamka Gudbinta: Taiwan Yintai
Qaybaha Korontada: Faransiiska SCHNEIDER
❖ Qaybaha sambabada hawada: Jabbaan SMC
❖ Qaybaha korontada ku shaqeeya: Jabbaan SUNX
Hubiyaha warqadda labajibbaaran ee Ultrasonic: Jabbaan KATO
❖ Suunka wax wareejinta: Swiss HABASIT
❖ Servo Motor: Jabbaan YASKAWA
❖ Dhimista Matoorka: Taiwan Chenggbang
❖ Qaadashada: Japanese NSK
❖ Nidaamka isku dhejinta: chromed birta aan birta lahayn, bamka qalabka naxaasta
❖ Bamamka Vacuum: Japanese ORION
(1) Si toos ah u geyn iyo ku dhejinta warqadda
(2) Si toos ah u geynta, meelaynta iyo meelaynta kartoonada.
(3) Afar-dhinac oo isku laabma oo hal mar ku samaysma (oo leh xagal toosan)
(4) Mashiinka oo dhan wuxuu qaataa dhismaha nooca furan ee naqshadeynta.Dhammaan mooshinnada si cad ayaa loo arki karaa.Dhibaatooyinka si fudud ayaa loo xallin karaa.
(5) Iyada oo saaxiibtinimada hawlgalka mashiinka-Human-Machine, dhammaan dhibaatooyinka waxaa lagu soo bandhigi doonaa kombiyuutarka.
(6) Daboolka plexiglass waxaa loo qaabeeyey si waafaqsan Heerarka CE ee Yurub, oo muujinaya badbaadada iyo bini'aadantinimada.
Interface Operation saaxiibtinimo
| Kiis sameeye toos ah | FD-AFM450A | |
| 1 | Cabbirka warqadda (A×B) | MIN: 130×230mm MAX:480×830mm |
| 2 | Dhumucda warqadda | 100-200g/m2 |
| 3 | Dhumucda kartoonada (T) | 1 ~ 3mm |
| 4 | Cabbirka alaabta dhammaatay (W×L) | MIN: 100×200mm MAX:450×800mm |
| 5 | Laf-dhabarta (S) | 10mm |
| 6 | Cabbirka warqadda laalaabsan (R) | 10 ~ 18mm |
| 7 | Tirada ugu badan ee kartoonada | 6xabo |
| 8 | Saxnaanta | ±0.50mm |
| 9 | Xawaaraha wax soo saarka | ≦25 xaashi/daqiiqo |
| 10 | Awoodda matoorka | 5kw/380v 3 waji |
| 11 | Sahayda hawada | 30L/daqiiqo 0.6Mpa |
| 12 | Awoodda kulayliyaha | 6kw |
| 13 | Miisaanka mashiinka | 3200kg |
Xidhiidhka u dhigma ee ka dhexeeya qeexitaannada:
A(min)≤W+2T+2R≤A(Max)
B(min)≤L+2T+2R≤B(Max)
❖ Sanduuqa Max.&min.cabbirada waxaa loo sakhiray cabbirka warqadda iyo tayada.
Xawaaraha mashiinku wuxuu ku xiran yahay cabbirrada sanduuqyada
❖ Dhererka dhejinta kartoonada: 220mm
❖ Dhererka warqadda lagu dhejiyo: 280mm
❖ Mugga haanta xabagta: 60L
❖ Wakhtiga shaqada ee hawlwadeenka xirfadda leh ee hal badeeco u beddelo mid kale: 30 daqiiqo
Laf-dhabarta jilicsan: ≥0.3mm oo dhumucdiisuna tahay, 10-60mm oo ballac ah, 0-450mm oo dherer ah
(1)Unugga Quudinta:
Quudiye-buuxa-buuxa: dhismo fudud, hawlgal ku habboon, naqshad cusub, ay maamusho PLC, u dhaqaaq si sax ah.
❖ Waxay u qabataa qalabka baaritaanka laba-warqad ee ultrasonic ee gudbinta waraaqaha
❖ Dib-u-habeeyaha warqadda wuxuu hubiyaa in warqaddu aysan leexan doonin ka dib marka la dhejiyo
(2)Unugga xabagta:
Quudiye-buuxa-buuxa: dhismo fudud, hawlgal ku habboon, naqshad cusub, ay maamusho PLC, u dhaqaaq si sax ah.
❖ Waxay u qabataa qalabka baaritaanka laba-warqad ee ultrasonic ee gudbinta waraaqaha
❖ Dib-u-habeeyaha warqadda wuxuu hubiyaa in warqaddu aysan leexan doonin ka dib marka la dhejiyo
❖ Haanta xabagta waxay si toos ah ugu dhejin kartaa wareegga, qas waxayna si joogto ah u kululayn kartaa oo shaandhayn kartaa.Aaladda degdegga ah ee isbeddelka leh, waxay qaadan doontaa 3-5 daqiiqo oo keliya isticmaaluhu inuu nadiifiyo dhululubada dhejiska.
❖ Mitirka viscosity-ka xabagta.(Ikhtiyaar)
(3) Qaybta gudbinta kartoonada
❖ Waxay qabataa feedhiyaha kartoonada hoose ee aan joogsiga lahayn ee mar kasta is dulsaaran, kaas oo wanaajinaya xawaaraha wax soo saarka.
❖ Baakadaha baabuur-sheegaha: mishiinku wuu joogsan doonaa oo qeylinayaa isagoo ka maqan hal ama dhowr xabbadood oo kartoonada ah marka la gudbinayo.
❖ Aalad jilicsan, oo si toos ah u quudinaysa oo goynaysa laf dhabarta jilicsan.(ikhtiyaar)
(4) Cutubka meelaynta
❖ Waxay qabataa servo motor si ay u wado qaadiyaha kartoonada iyo unugyada korantada saxda ah ee saxda ah si ay u dhigaan kartoonada.
❖ Marawaxada nuugista faakuumka ka buuxo ee ka hoosaysa suunka qaada waxa ay warqada si adag ugu nuugi kartaa suunka qaada qaadaha.
❖ Qaadista kartoonada waxay shaqaaleysiisaa servo motor
❖ Servo iyo aaladda meelaynta dareenka waxay hagaajisaa saxnaanta.(ikhtiyaar)
❖ PLC waxay gacanta ku haysaa dhaqdhaqaaqa onlaynka ah
❖ Dhululubada ka hor inta aan la daabicin ee suunka qaada ayaa hubin karta in kartoonada iyo warqadda la arkay ka hor inta aan dhinacooda la laaban.
(5) Afar-geesunugga laablaaban
❖ Waxay qabataa suunka saldhigga filimka si uu u laalaabo wiishka iyo dhinacyada midig.
Trimmer-gu wuxuu ku siin doonaa natiijada laablaabashada dhawaaqa
❖ Waxay qabataa trimmer pneumatic si ay u jarto geesaha.
❖ Waxay qabataa qaade hore iyo gadaalba iyo gacan-qabsi si uu u laalaabo.
❖ Rollers-lakabyo badan oo la cadaadiyo waxay xaqiijiyaan tayada alaabta dhamaadka ah iyada oo aan xumbo lahayn.
1. Shuruudaha Dhulka
Mashiinka waa in lagu dhejiyaa dhulka siman oo adag kaas oo hubin kara inuu leeyahay awood ku filan oo culeys ah (qiyaastii 300kg / m2).Mashiinka agagaarkiisa waa inuu hayaa meel ku filan hawlgalka iyo dayactirka.
2. cabbirka mashiinka
3.Xaaladaha Ambient
Heerkulka: Heerkulka deegaanka waa in lagu hayaa ku dhawaad 18-24°C(qaboojiye waa in la qalabeeyaa xagaaga
❖ Qoyaanka: qoyaanka waa in lagu xakameeyaa qiyaastii 50-60%
❖ Iftiin: Qiyaastii 300LUX taas oo hubin karta in qaybaha korantada ay si joogto ah u shaqayn karaan.
❖ In laga fogaado gaaska saliidda, kiimikooyinka, acidic, alkali, walxaha qarxa iyo walxaha gubanaya.
❖ Si aad uga ilaaliso mashiinku gariir iyo gariir iyo in uu buul u galo qalabka korantada oo leh goob koronto-magneteed sare leh.
❖ Si aad uga ilaaliso in ay si toos ah u soo gaadhin qorraxda.
❖ Si aad uga ilaaliso in marawaxadu si toos ah u afuufo
4. Shuruudaha Agabka
❖ Warqadaha iyo kartoonada waa in si siman loo hayaa mar walba.
❖ Laminating-ka warqadda waa in si elektaroonik ah loogu habeeyo laba-dhinac.
❖ Saxnimada goynta kartoonada waa in lagu xakameeyaa ± 0.30mm
5. Midabka warqadda dhejiska ah waxay la mid tahay ama la mid tahay kan suunka gudbinta (madow), iyo midab kale oo cajalad ah waa in lagu dhejiyaa suunka qalabka. midabka cajalad: cad)
6.The koronto: 3 wajiga, 380V / 50Hz, mararka qaarkood, waxa ay noqon kartaa 220V / 50Hz 415V / Hz sida waafaqsan xaaladaha dhabta ah ee dalal kala duwan.
7. Hawada hawada: 5-8 jawi (cadaadiska jawiga), 30L / min.Tayada liidata ee hawadu waxay inta badan u horseedi doontaa dhibaatooyin mashiinada.Waxay si dhab ah u dhimi doontaa kalsoonida iyo nolosha nidaamka pneumatic, taas oo keeni doonta khasaare badan ama dhaawac kaas oo si aad ah uga sarreeya kharashka iyo dayactirka nidaamkan.Sidaa darteed waa in farsamo ahaan loo qoondeeyaa nidaam sahayda hawada oo tayo wanaagsan leh iyo curiyehooda.Kuwa soo socda ayaa ah hababka sifaynta hawada oo kaliya tixraaca:
| 1 | Compressor hawada | ||
| 3 | Haanta hawada | 4 | Shaandheeyaha dhuumaha waaweyn |
| 5 | Habka qaboojinta qalajiyaha | 6 | ceeryaamo saliid kala saara |
❖ Kombaresarada hawadu waa qayb aan caadi ahayn oo mashiinkan ah.Mashiinkan laguma siin kombaresarada hawada.Waxaa si madax banaan u iibsada macaamiisha (Awood kombaresarada: 11kw, heerka socodka hawada: 1.5m3/daqiiqo).
❖ Shaqada haanta hawada (mugga 1m3, cadaadis: 0.8MPa):
a.Si qayb ahaan loo qaboojiyo hawada oo leh heerkul sare oo ka soo baxaya kombareeyaha hawada iyada oo loo marayo haanta hawada.
b.Si loo dejiyo cadaadiska ay curiyeyaasha firfircoon ee dhabarku u adeegsadaan curiyayaasha pneumatic-ka.
❖ shaandhada ugu weyn ee dhuumaha waa in laga saaro wasakhda saliidda, biyaha iyo boodhka, iwm ee hawada isku dhufatay si loo hagaajiyo waxtarka shaqada qalajiyaha habka soo socda iyo in loo dheereeyo nolosha filtarka saxda ah iyo qalajiyaha dhabarka .
❖ Qalajiyaha qaabka qaboojiye waa in la shaandheeyo oo la kala saaro biyaha ama qoyaanka hawada cufan ee uu farsameeyo qaboojiyaha, kala-soocida saliidda-biyaha, haanta hawada iyo filtarka tuubada weyn ka dib marka hawada ciriiriga ah laga saaro.
❖ Kala-duwayaasha ceeryaamo saliiddu waa inay kala shaandheeyaan oo kala saaraan biyaha ama qoyaanka hawada cufan ee uu farsameeyo qalajiyaha.
8. Shakhsiyaadka: iyadoo loo eegayo badbaadada hawlwadeenada iyo mishiinada, si buuxdana uga faa'iidaysanaysa waxqabadka mishiinka, yaraynta dhibatooyinka iyo cimriga dheeraynta, 2-3 farsamo yaqaan ah oo awood u leh inay ku shaqeeyaan oo dayactiraan mishiinnada. ku shaqee mishiinka.
9.Qalabka caawinta
Xabagta: xabagta xayawaanka (Jelly jelly, Shili gel), qeexid: xawli sare oo degdeg ah qaabka qalalan
Ikhtiyaarka FD-KL1300A kartoonada gooya
(Qalabka Caawiya 1)
Waxaa inta badan loo isticmaalaa in lagu gooyo walxaha sida hardboard, kartoonada warshadaha, kartoonada cawl, iwm.
Waxay lagama maarmaan u tahay buugaagta daboolka adag, sanduuqyada, iwm.
1. Ku quudinta kartoonada cabbirka weyn ee gacanta iyo kartoonada cabbirka yar si toos ah.Servo ayaa lagu xakameeyay oo lagu rakibay shaashadda taabashada.
2. Dhululubada pneumatic ayaa xakameynaya cadaadiska, hagaajinta fudud ee dhumucda kartoonada.
3. Daboolka badbaadada waxaa loo qaabeeyey si waafaqsan heerka CE ee Yurub.
4. Qaado nidaamka saliidaynta ee xoogga leh, si sahlan loo ilaaliyo.
5. Qaab dhismeedka ugu weyn wuxuu ka samaysan yahay birta wax lagu shubo, xasilloon oo aan foorarsaneyn.
6. Burburiyaha wuxuu u gooyaa qashinka qaybo yaryar wuxuuna ku soo daayaa suunka qaadaha.
7. Wax soo saarka dhammaatay: oo leh suunka gudbinta 2 mitir ee ururinta.
| Qaabka | FD-KL1300A |
| Ballaca kartoonada | W≤1300mm, L≤1300mmW1=100-800mm, W2≥55mm |
| dhumucda kartoonada | 1-3mm |
| Xawaaraha wax soo saarka | ≤60m/daqiiqo |
| Saxnaanta | + -0.1mm |
| Awoodda matoorka | 4kw/380v 3 waji |
| Sahayda hawada | 0.1L/daqiiqo 0.6Mpa |
| Miisaanka mashiinka | 1300kg |
| cabbirka mashiinka | L3260×W1815×H1225mm |
Fiiro gaar ah: Ma bixinno kombaresarka hawada.
Quudinta otomaatiga ah
Waxa ay qabataa quudiyaha hoose ee la sawiray kaas oo quudinaya alaabta isaga oo aan joogsan.Waxay diyaar u tahay in lagu quudiyo cabbir yar oo looxa si toos ah.
Servoiyo Kubbada isku dhufashada
Quudiyeyaasha waxaa gacanta ku haya birta kubbadda, oo uu wado matoorka servo kaas oo si hufan u wanaajiya saxnaanta kana dhigaya mid fudud.
8 qayboodee SareMindiyo tayo leh
Qabo mindiyo wareeg ah oo daawaha ah kuwaas oo yareeya nabarrada oo wanaajiya waxtarka goynta.Raagaya.
Dejinta fogaanta mindida otomaatiga ah
Fogaanta khadadka la jaray waxaa lagu dejin karaa shaashadda taabashada.Sida ku cad goobta, hagaha ayaa si toos ah ugu dhaqaaqi doona booska.Looma baahna cabbir
Daboolka badbaadada caadiga ah ee CE
Daboolka badbaadada waxaa loo qaabeeyey si waafaqsan heerka CE kaas oo si hufan uga hortagaya khalkhalka oo hubinaya badbaadada shakhsi ahaaneed.
Burburiyaha qashinka
Qashinka si toos ah ayaa loo jajabin doonaa oo la ururin doonaa marka la jarayo xaashida weyn ee kartoonada.
Qalabka xakamaynta cadaadiska pneumatic
Samee dhululubada hawada ee xakamaynta cadaadiska taas oo yaraynaysa shuruudaha hawlgalka ee shaqaalaha.
Shaashada taabashada
HMI saaxiibtinimo waxay caawisaa hagaajinta si fudud oo degdeg ah.Iyada oo leh miiska tooska ah, alaarmiga iyo dejinta masaafada mindida, beddelka luqadda.
ZX450 gooyaha lafdhabarta
(Qalabka Caawiya 2)
Waa qalab gaar ah oo ku jira buugaagta daboolka adag.Waxaa lagu gartaa dhismo wanaagsan, qalliin fudud, jeex nadiif ah, saxnaanta sare iyo waxtarka iwm. Waxaa lagu dabaqaa in la gooyo lafdhabarta buugaagta daboolka adag.
1. Xajinta korantada ee hal-chip, shaqo xasilloon, fududahay in la isku hagaajiyo
2. Nidaamka saliidaynta ee xoogga leh, si sahlan loo ilaaliyo
3. Muuqaalkeedu wuxuu ku qurux badan yahay naqshadeynta, daboolka badbaadada ee waafaqsan heerka CE ee Yurub
| Ballaca kartoonada | 450mm (ugu badnaan) |
| Ballaca laf dhabarta | 7-45mm |
| Kaadhkadhumucda looxa | 1-3mm |
| Xawaaraha jarista | 180 jeer/min |
| Awoodda matoorka | 1.1kw/380v 3 waji |
| Miisaanka mashiinka | 580kg |
| cabbirka mashiinka | L1130×W1000×H1360mm |
