Sameeyaha Sanduuqa Adag ee RB6040
(1) Qaybta gaarsiinta tooska ah ee quudiyaha waraaqaha.
(2) wareegga tooska ah, isku dhafka iyo nidaamka dhejinta ee jel-kulul-kulul. (Qalabka ikhtiyaariga ah: mitirka viscosity mitir)
(3) Xabag kulul oo dhalaalaysa waraaqo si toos ah u gudbinaya, jeexjeexa, oo dhammaystiraya dhejinta sanduuqa gudaha ee afarta xaglood ee hal geeddi-socod.
(4) Marawaxada nuugista faakuumka hoosteeda suunka qaada waxa ay ka ilaalin kartaa warqadda xabagta in aanay leexan.
(5) Sanduuqa gudaha ee xaashida dhejiska ah iyo kartoonada waxay adeegsadaan aaladda hagaajinaysa pneumatic hayroolik si ay si sax ah u aragto. Cilad-sheegiddu waa ±0. 5mm
(6) Qaybta samaynta sanduuqa waxay si toos ah u ururin kartaa sanduuqyada waxayna geyn kartaa unugga samaynta iyadoo la raacayo sanduuqyada lagu qaado suunka qaadaha.
(7) Qaybta santuuqa-samaynta waxay si joogto ah u geyn kartaa sanduuqyada, waxay duubi kartaa dhinacyada, dhegaha laabi kartaa iyo dhinacyada warqadaha waxayna ku samayn kartaa hal hab.
(8) Mashiinka oo dhan wuxuu ka shaqeeyaa PLC, nidaamka qalabka qalabka wax lagu baaro iyo shaashadda taabashada mashiinka-mashiinka si ay si toos ah ugu sameeyaan sanduuqyada hal hab.
(9) Waxay si toos ah u baari kartaa dhibaatooyinka iyo qaylo-dhaanta si waafaqsan.
Interface Operation saaxiibtinimo
| Sameeyaha sanduuq adag oo toos ah | |||
| 1 | Cabbirka warqadda (A×B) | Aamiin | 120mm |
| Amax | 610mm | ||
| Bmin | 250mm | ||
| Bmax | 850mm | ||
| 2 | Dhumucda warqadda | 100-200g/m2 | |
| 3 | Dhumucda kartoonada (T) | 1 ~ 3mm | |
| 4 | Badeecada dhammaatay (sanduuqa) cabbirka(W×L×H) | Wmin | 50mm |
| Wmax | 400mm | ||
| Lmin | 100mm | ||
| lmax | 600mm | ||
| Hmin | 15mm | ||
| Hmax | 150mm | ||
| 5 | Cabbirka warqadda laalaabsan (R) | Rmin | 7mm |
| rmax | 35mm | ||
| 6 | Saxnaanta | ±0.50mm | |
| 7 | Xawaaraha wax soo saarka | ≦35 xaashi/daqiiqo | |
| 8 | Awoodda matoorka | 10.35kw/380v 3 waji | |
| 9 | Awoodda kulayliyaha | 6kw | |
| 10 | Miisaanka mashiinka | 6800kg | |
| 11 | cabbirka mashiinka | L6600×W4100×H 3250mm | |
● Cabbirrada ugu badan iyo kuwa yar-yar ee sanduuqyada waxay hoos yimaadaan kuwa waraaqaha iyo tayada warqadda
● Awoodda wax soo saarku waa 35 sanduuq daqiiqadii. Laakiin xawaaraha mishiinku wuxuu ku xiran yahay cabbirrada sanduuqyada
● Meelaynta saxda ah: ± 0. 5mm
● Dhererka lagu dhejiyo kartoonada: 1000mm (Max)
● Xabagta dhalaalaysa kulul ee ugu badan. dhexroor: 350mm, dhexroorka: 50mm
● Dhererka dhejiska warqadda: 300mm (Max)
● Mugga haanta jel: 60L
● Ka shaqayso wakhtiga beddelka hawlwadeenka xirfadda leh ee hal badeeco una guura mid kale: 45min
● Miisaanka saafiga ah: 6800kg
● Wadarta Awoodda: 16.35k
(1) Xabag (cutubka dhejiska warqadda)
● Quudiyeha iyo suunka qaada qaadaha waxay adeegsadaan feedhiyaha isku midka ah ee dhululubada dhejiska ah. Xawaaraheeda waa la hagaajin karaa.
● Isku hagaajin dhumucdiisuna waxay ku habboon tahay, si siman ugu dheji kartoonada ama warqadda bidix iyo midig.
● Haanta jelku waa heerkul joogto ah, waxayna si toos ah isugu qasi kartaa, shaandhayn kartaa iyo xabagta si wareeg ah.
● Taangiga jeelku waxa uu leeyahay waalka shift-ga degdega ah, kaas oo isticmaaluhu uu si dhakhso ah ugu nadiifin karo dhululubada xabagta 3 ilaa 5 daqiiqo gudahood.
Silinda birta dahaadhka ah ee Chromatic-plated, tignoolajiyada ugu dambeysay, ayaa lagu dabaqi karaa jeelyo kala duwan, oo muujinaya adkaysi.
(2) Hore ( unugga ku dheggan afar-xagal)
● Quudinta ayaa si toos ah u quudinaysa kartoonnada. kartoonada waxaa lagu dhejin karaa 1000mm sare.
● Gaadhida sharoobada ee kulul ee dhalaalaysa ee ku dheggan, gooyeeyaha iyo ku dheggan afar-geesoodka ah
● Alaarmiga baabuurka ee maqnaanshaha cajaladda koollada ee kulul
● Suunka gawaadhida otomaatiga ah ee ku xidhan afar geesaha iyo qaybta meelaynta.
• Quudinta kartoonada ayaa si toos ah ula socon kara socodka iyadoo la raacayo mashiinnada habka isku xirka.
(3) Spotter (cutubka dhejiska)
● Marawaxada nuugista faakuumka hoosteeda suunka qaada waxa ay ka ilaalin kartaa warqada xabagta in aanay leexan.
● Kormeeraha korantada ee saxda ah ee la soo dejiyay
● Dib-u-habeeyaha hawo-mareenka oof-wareenka ayaa ah jawaab degdeg ah oo sax ah.
(4) Duubka (cutubka samaynta sanduuqa)
● Suunka qaadaha iyo qaybta samaynta sanduuqa ee qalabka sawirka santuuqa ee tooska ah waxa gacanta ku haya kombuyuutar.
● Sanduuqyada quudinta joogtada ah, duub dhinacyada, laab dhegaha oo laab laab laab warqad oo samee sanduuqyo hal habraac.
● Hawlgalka badbaadada iyo ilaalinta
Xidhiidhka u dhigma ee ka dhexeeya qeexitaannada:
W+2H-4T≤C(Max)
L+2H-4T≤D(Max)
A(daqiiqo)≤W+2H+2T+2R≤A(Max)
B(daq)≤L+2H+2T+2R≤B(Max)
1. Shuruudaha Dhulka
Mashiinka waa in lagu dhejiyaa dhulka siman oo adag kaas oo hubin kara inuu leeyahay awood ku filan oo culeys ah (qiyaastii 500kg / m2). Mashiinka agagaarkiisa waa inuu hayaa meel ku filan hawlgalka iyo dayactirka.
2.Xajmiga
3. Xaaladaha Ambient
● Heerkulka: heerkulka deegaanka waa in lagu hayaa ilaa 18-24°C (qaboojiyaha waa in la qalabeeyaa xagaaga.)
● Qoyaanka: qoyaanka waa in lagu xakameeyaa 50%-60%.
● Iftiin: ka sarreeya 300LUX taas oo hubin karta in qaybaha korantada ay si joogto ah u shaqayn karaan.
• Inaad ka fogaato gaaska saliidda, kiimikooyinka, aashitada, alkali, walxaha qarxa iyo walxaha guban kara.
● Si aad uga ilaaliso mashiinku gariir iyo gariir iyo in uu ag joogo qalabka korantada ee leh goob koronto-magneteed sare leh.
● Si aad uga ilaaliso inay si toos ah u soo gaadhin qorraxda.
● Si aad uga ilaaliso in taageeruhu si toos ah u afuufin.
4. Shuruudaha Agabka
● Waraaqaha iyo kartoonada waa in si siman loo hayaa mar walba.
● Waraaqaha dahaadhidda waa in si elektaroonik ah loogu habeeyo laba-dhinac.
5. Midabka warqadda xabaggu waxa uu la mid yahay ama la mid yahay kan suunka wax qaada (madow), midab kale oo cajalad ku dheggan waa in lagu dhejiyaa suunka qaadaha.
6. Korontada: 3 waji 380V/50Hz (mararka qaar, waxay noqon kartaa 220V/50Hz,415V/Hz marka loo eego xaaladaha dhabta ah ee wadamada kala duwan).
7. Hawada hawada: 5-8 jawi (cadaadiska jawiga), 10L / min. Tayada liidata ee hawadu waxay inta badan u horseedi doontaa dhibaatooyin mashiinada. Waxay si dhab ah u dhimi doontaa kalsoonida iyo nolosha nidaamka pneumatic, taas oo keeni doonta khasaare ama khasaare weyn oo si aad ah uga sarreeya kharashka iyo dayactirka nidaamkan. Sidaa darteed waa in farsamo ahaan loo qoondeeyaa nidaam sahayda hawada oo tayo fiican leh iyo curiyehooda. Kuwa soo socda ayaa ah hababka hawada sifaynta oo keliya tixraaca:
| 1 | Compressor hawada |
| |
| 3 | Haanta hawada | 4 | Shaandheeyaha dhuumaha waaweyn |
| 5 | Habka qaboojinta qalajiyaha | 6 | ceeryaamo saliid kala saara |
● Compressor-ka hawadu waa qayb aan caadi ahayn oo mashiinkan ah. Mashiinkan laguma siin kombaresarada hawada. Waxaa iibsada macaamiishu si madax-bannaan.
● Shaqada haanta hawada:
a. Si qayb ahaan loo qaboojiyo hawada oo leh heerkul sare oo ka soo baxaya kombareeyaha hawada iyada oo loo marayo haanta hawada.
b. Si loo dejiyo cadaadiska ay walxaha firfircoon ee dhabarku u adeegsadaan curiyayaasha pneumatic-ka.
● Filterka ugu weyn ee dhuumaha waa in laga saaro wasakhda saliidda, biyaha iyo boodhka, iwm ee hawada isku dhufatay si loo hagaajiyo waxtarka shaqada qalajiyaha habka soo socda iyo in loo dheereeyo nolosha filtarka saxda ah iyo qalajiyaha dhabarka .
● Qalajiyaha qaabka qaboojiye waa in la shaandheeyo oo la kala saaro biyaha ama qoyaanka ku jira hawada ciriiriga ah ee lagu farsameeyo qaboojiyaha, kala-soocida saliidda-biyaha, haanta hawada iyo filtarka tuubada weyn ka dib marka hawada ciriiriga ah laga saaro.
● Kala-duwayaasha ceeryaamo saliiddu waa in la shaandheeyo oo la kala saaro biyaha ama qoyaanka ku jira hawada la cufan ee uu farsameeyo qalajiyaha.
8. Shakhsiyaadka: iyadoo loo eegayo badbaadada hawlwadeenada iyo mishiinada, si buuxdana uga faa'iidaysanaysa waxqabadka mishiinka, yaraynta dhibatooyinka iyo cimriga dheeraynta, 2-3 qof, farsamoyaqaano xirfad leh oo awood u leh inay ku shaqeeyaan oo dayactiraan mishiinka. loo xilsaaray inuu ku shaqeeyo mishiinka.
9. Qalabka caawimada ah
● Tilmaamaha cajaladda dhalaalaysa kulul: ballac 22mm, dhumucdiisuna waa 105 g/m2, Dhexroorka dibadda: 350mm (Max), dhexroorka gudaha 50mm, Dhererka 300m / Goobo, barta dhalaalaysa: 150-180 ° C
● Xabagta: xabagta xayawaanka (Jelly jelly, Shili gel), qeexid: xawli sare oo degdeg ah qaabka qalalan.
Ikhtiyaarka FD-KL1300A kartoonada gooya
(Qalab Kaalmo ah)
Waxaa inta badan loo isticmaalaa in lagu gooyo walxaha sida hardboard, kartoonada warshadaha, kartoonada cawl, iwm.
Waxay lagama maarmaan u tahay buugaagta daboolka adag, sanduuqyada, iwm.
1. Ku quudinta kartoonada cabbirka weyn ee gacanta iyo kartoonada cabbirka yar si toos ah. Servo ayaa lagu xakameeyay oo lagu rakibay shaashadda taabashada.
2. Dhululubada pneumatic ayaa xakameynaya cadaadiska, hagaajinta fudud ee dhumucda kartoonada.
3. Daboolka badbaadada waxaa loo qaabeeyey si waafaqsan heerka CE ee Yurub.
4. Qaado nidaamka saliidaynta ee xoogga leh, si sahlan loo ilaaliyo.
5. Qaab dhismeedka ugu weyn wuxuu ka samaysan yahay birta wax lagu shubo, xasilloon oo aan foorarsaneyn.
6. Burburiyaha wuxuu u gooyaa qashinka qaybo yaryar wuxuuna ku soo daayaa suunka qaadaha.
7. Wax soo saarka dhammaatay: oo leh suunka gudbinta 2 mitir ee ururinta.
Socodka Wax-soo-saarka:
Halbeegga farsamada ugu muhiimsan:
| Qaabka | FD-KL1300A |
| Ballaca kartoonada | W≤1300mm, L≤1300mm W1=100-800mm, W2≥55mm |
| dhumucda kartoonada | 1-3mm |
| Xawaaraha wax soo saarka | ≤60m/daqiiqo |
| Saxnaanta | + -0.1mm |
| Awoodda matoorka | 4kw/380v 3 waji |
| Sahayda hawada | 0.1L/daqiiqo 0.6Mpa |
| Miisaanka mashiinka | 1300kg |
| cabbirka mashiinka | L3260×W1815×H1225mm |
Fiiro gaar ah: Ma bixinno kombaresarka hawada.
Quudinta otomaatiga ah
Waxa ay qabataa quudiyaha hoose ee la sawiray kaas oo quudinaya alaabta isaga oo aan joogsan. Waxay diyaar u tahay in lagu quudiyo cabbir yar oo looxa si toos ah.
Servoiyo Kubbada isku dhufashada
Quudiyeyaasha waxaa gacanta ku haya birta kubbadda, oo uu wado matoorka servo kaas oo si hufan u wanaajiya saxnaanta kana dhigaya mid fudud.
8 qayboodee SareMindiyo tayo leh
Qabo mindiyo wareeg ah oo daawaha ah kuwaas oo yareeya nabarrada oo wanaajiya waxtarka goynta. Waara.
Dejinta fogaanta mindida otomaatiga ah
Fogaanta khadadka la jaray waxaa lagu dejin karaa shaashadda taabashada. Sida ku cad goobta, hagaha ayaa si toos ah ugu dhaqaaqi doona booska. Looma baahna cabbir
Daboolka badbaadada caadiga ah ee CE
Daboolka badbaadada waxaa loo qaabeeyey si waafaqsan heerka CE kaas oo si hufan uga hortagaya khalkhalka oo hubinaya badbaadada shakhsi ahaaneed.
Burburiyaha qashinka
Qashinka si toos ah ayaa loo jajabin doonaa oo la ururin doonaa marka la jarayo xaashida weyn ee kartoonada.
Qalabka xakamaynta cadaadiska pneumatic
Samee dhululubada hawada ee xakamaynta cadaadiska taas oo yaraynaysa shuruudaha hawlgalka ee shaqaalaha.
Shaashada taabashada
HMI saaxiibtinimo waxay caawisaa hagaajinta si fudud oo degdeg ah. Iyada oo leh miiska tooska ah, alaarmiga iyo dejinta masaafada mindida, beddelka luqadda.
